Web-Logo

Driveways

You are here: Home » What Is The Best Way To Lay Tarmac?

What Is The Best Way To Lay Tarmac?

What Is The Best Way To Lay Tarmac?

Tarmac

The tarmacing of your driveway is a very practical and popular option if your driveway is in need of a makeover, whether it has weathered years of intensive use and is now showing its age, or you just want to retouch it to make it more in keeping with the overall appearance of your house, But how does one go about laying tarmac? It is the purpose of this article to discuss the different materials and stages involved in the process of tarmacing a driveway.

Excavation

Before any tarmac installation can commence, the ground must first be dug to what is known as ‘formation level,’ which is the level of the earth’s surface. Driveways with good ground and no additional factors have a formation level that is 175mm below the paving level, according to industry standards.

Edging

It is necessary to employ edging to keep the tarmac in place because, if it is not restricted, the margins of the surface would fracture and collapse as a result of repetitive vehicle traffic. Materials such as wood are ideal for this work since they are both sturdy and long-lasting.

Protection

Immediately after the excavation of the ground surface, a Geotextile woven membrane is set in place. This will aid in the suppression of weed growth and the minimization of any sinking. It also helps to reinforce the driveway’s foundation, making it more suitable for large vehicles.

Layering

It is then compacted and rolled till it reaches the exact depth that will be utilised for the driveway on top of the Geotextile membrane.

Drainage

Drainage is essential for the construction of a driveway, even if it is paved with asphalt. At this stage, it is necessary to install this so that it can be used as efficiently as possible to remove excess water from the driveway.

Edgings made of concrete

The concrete edgings are now being put at this stage.

Block paving and sandstone sets are some of the options (optional)

Depending on your preference, you may decide to pave the margins of your driveway using block pavement. A decorative border around the drive and/or an additional layer of colour on the surface may be added in this manner.

Tarmac should be used.

Following the completion of the stages, the tarmac is ready for application. A foundation coat of about two inches of tarmac should be put as a first layer of protection. A roller should be used to compress the topcoat into the base coat once it has been applied. To get the finest potential results, tarmacing a driveway is a technique that demands extreme accuracy. Upon completion, you will be left with a finished product that enhances the appearance of your property while also providing a long-lasting solution that can withstand regular use by large trucks.